Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Convert gerber rs-274X to gerber rs-274D

Status
Not open for further replies.
G

guiclem

Newbie level 2
Newbie level 2
Joined
Mar 19, 2007
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
Hello,
I want do convert new version of gerber file rs274X to the older one RS274D cause we have a glaser machine that does not accept the newer version.
If we can't, is there a maneer to get RS274D gerber from dxf or other format?
I really need RS274D gerber
Thx a lot
 

Hi,

There is one tool called "Gerbtool" come along with Cadence layout plus. You can make use of that and import the present gerber and export the gerber's t required format. I have not tried but there is option.

- prasguy
 

    V

    Points: 2
    Helpful Answer Positive Rating
Thx for your quick answer.
But Is there a freeware or a trial version of a software which can do that?
 

if it is a small file you can open rs-274X in wordpad and manually edit it into rs-274D format and save.

sample Format of rs-274D . It reads D-code 11 ,12 are available at following XY locations
D11*
X1785250Y2173980D02*
X1796650Y2177730D01*
X1785250Y2181480D01*
X1796650Y2184580D02*
D12*
X3421095Y1407208D02*
X3422388Y1406150D01*
M02
 

If you do it manualy the header for the RS-274X is used to create the apperture table. The format can be found here, it also has a section on the D format as well. It provides enough info to do the cnage manually. Off the top of my head, I dont think there is a free Gerber Viewer that does what you want, but I may be wrong, but on another forum we looked into free gerber viewers and what you can do with them.
**broken link removed**
 

Ignore the above spam post - dmf now cannot do this unless you pay for the advanced version. [Moderator note - the spam has been removed so this comment refers to an invisible post]

I am sure that there are some Gerber Viewers out there that will do this.

GC-Prevue is not able to export also.

Search this forum for other gerber viewers.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top