Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST MWS Phase center calculation

Status
Not open for further replies.
eirp

eirp

Advanced Member level 1
Advanced Member level 1
Joined
Dec 11, 2001
Messages
466
Helped
29
Reputation
56
Reaction score
19
Trophy points
1,298
Location
Phase center
www.edaboard.com
Activity points
5,138
phase centre calculation cst

Hi all EM fans!

Does anyone have experience with phase center calculations in MWS?
I did some tests with theoretical results on rectangular horn and found good agreement in one plane. In second plane the results were different.

Who knows what the "Sigma" stands for? I mean when displaying the result there is phase center location and the Sigma value too.

What are your observations?

Thanks a lot

eirp
 

phase center cst

Hi,

the sigma is some kind of error measurement. You can specify a certain solid angle on a sphere for which the phase centre is calculated. The Phase Centre is the point, were the phase difference between all that points has its minimum.
The sigma is a value for the phase difference on all the points.

Large Sigma means: the phase varies quite lot on the sphere section.

Small sigma: the phase is pretty much identical on all points of the sphere section.

F.
 
  • Like
Reactions: ymanuq

    Y

    ymanuq

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top