Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] 48V 300Amps Lead acid/gel battery charger circuit

Status
Not open for further replies.
S

sathia

Newbie level 3
Newbie level 3
Joined
Feb 23, 2011
Messages
4
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,302
Hello all ,

I want to design battery charger to charge 48V 3000Ah battery . If any one have schematic for 48V 300Adc please forward to me . The input source for the charger is three phase generator .

thanks in advance
 

Last edited:

    V

    Points: 2
    Helpful Answer Positive Rating
i want to charge 48V 3000Ah battery bank . There are 24 batteries in the string . Each cell is 2V and 3000Ah . So , im sure i need 48V 300A battery charger .
 

    V

    Points: 2
    Helpful Answer Positive Rating
im sure i need 48V 300A battery charger
Click to expand...
Yes, I think so. The basic circuit is simple: have a three-phase transformer, SCR full bridge, a choke, and a phase-angle controller.
 
  • Like
Reactions: sathia

    S

    sathia

    Points: 2
    Helpful Answer Positive Rating
Here is why I say 30 amps. Sorry I was misinformed.

**broken link removed**



Here are some in the class you want.

**broken link removed**

Check out the Manuals. Some of them have Schematics!

**broken link removed**
 
Last edited:
  • Like
Reactions: sathia

    S

    sathia

    Points: 2
    Helpful Answer Positive Rating
hotwaterwizard , you are star !
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top