kaizer002
Newbie level 5
![Newbie level 5](/styles/images/ranks/blevel2.gif)
Hello guys, I need some advice for my project. It's a digital thermometer with clock using seven segment LED. The sensors that will be used in this project are LM35(temperature sensor) and HIH4000(humidity sensor) but the problem is, the HIH4000 is not available in our country.
Because of that, I come up with this idea. Is it okay to remove the HIH4000 sensor and I will connect the 2nd pin of LM35 to pin A0 and pin A1 of PIC16F877a?
here is the original schematic:
**broken link removed**
Removed HIH4000 and LM35 connected to pinA0 and pinA1:
**broken link removed**
Source code on attachment...
Because of that, I come up with this idea. Is it okay to remove the HIH4000 sensor and I will connect the 2nd pin of LM35 to pin A0 and pin A1 of PIC16F877a?
here is the original schematic:
**broken link removed**
Removed HIH4000 and LM35 connected to pinA0 and pinA1:
**broken link removed**
Source code on attachment...
Attachments
Last edited: