Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

36 volt smps design problem

Status
Not open for further replies.
R

rozmad

Junior Member level 2
Junior Member level 2
Joined
May 29, 2009
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,410
hi
Im design a smps 36v 4a by piexpert but I have two problem
1-chock have a noios tik tik tik ....
2- output is 36v but current has very low amper about 100ma
help me
 

Attachments

  • sch.pdf
    59.1 KB · Views: 181

Man, i have made a fast checking and i don't have found problems..
But about the low amperage, can be de inductor wire.
What wire gauge you are using for the inductor?
 
  • Like
Reactions: rozmad

    R

    rozmad

    Points: 2
    Helpful Answer Positive Rating
check the transformer
 
  • Like
Reactions: rozmad

    R

    rozmad

    Points: 2
    Helpful Answer Positive Rating
hi
transs specification
 

Attachments

  • TOPSwitch-GX_PIDesign2.pdf
    82.1 KB · Views: 154

checked the transformer?, use proper varnish and try
 
  • Like
Reactions: rozmad

    R

    rozmad

    Points: 2
    Helpful Answer Positive Rating
TOP devices are sensitive to the amount of primary winding inductance.
I once had a similar problem and after redesign of my transformer to get the primary inductance in the range suggested by the ap note it started up with no problem.
Before that it just tic, tic as you describe.
 
  • Like
Reactions: rozmad

    R

    rozmad

    Points: 2
    Helpful Answer Positive Rating
thank from all
my design not worked Im continue
Im need the 35volt 3a smps very easy design same to me
 

thank from all
my design not worked Im continue
Im need the 35volt 3a smps very easy design same to me
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top