Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help in dielectric resonator band pass filter design in HFSS

Status
Not open for further replies.
H

HAIKS

Newbie level 1
Newbie level 1
Joined
Jan 26, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
i m designing the dielectric resonator band pass filter and the resonant frequency is 3.824 GHZ.no problem is occuring till silmulation but after that the results for s-parameter is only the tiny circle at that frequency.whch is not the proper result as there should be. the dimension as i m knowing are correct as i have took the from some thesis of senior and how to send my image i really dont know as it is in .HFSS extension and it is not supported ......plz reply me as soon as possible ..thanx alot
 

Re: help in dielectric resonator band pass filter design in

I guess there is some problem is the file. Send it to me and i ll figure out solution for u...
 

Re: help in dielectric resonator band pass filter design in

Did you forget to add a frequency sweep
 

i made a rec cavity in HFSS and had the same problem. there can be 2 reasons, 1; ur not analyzing before seeing results, 2; there might be an error in the 3D design, not in dimensions but the way you made the fig.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top