Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Rain Sensor (PIC Usage)

Status
Not open for further replies.
G

grkmr

Newbie level 3
Newbie level 3
Joined
Jan 31, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
Hi all,

I'm responsible to build a rain sensor with the help of PIC programming. However, I don't know in which stage I should use it.
Project is simply to detect water and run an engine using the data that comes from the sensor. I plan such a circuit basically:

Water ---> Sensor ---> PIC ---> (Amplifier if needed) ---> Engine

The main problem is that I don't know what kind of code should I use in PIC, what is the purpose of PIC? Will it work as an DAC(Digital to analog circuit)?

Thanks!
 

Hi,

What is the type of sensor you need to use ?
If there is no logic to manipulate, there is no need to use PIC. You can directly connect sensor to amplifier stage.
Like "If it is raining" then "Start engine"; if this only you need to do neglect PIC.

Thank you,
 

thank you so much for the answers
 

Actually L4620 is only fixed level sensor. You need to use QT300 from Atmel or even some 3 electrode slider to measure precisely the level of the water.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top