Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to interface AT89S52 microcontroller with a Network Card

Status
Not open for further replies.
S

sunil21

Advanced Member level 4
Full Member level 1
Joined
Dec 2, 2010
Messages
119
Helped
4
Reputation
8
Reaction score
5
Trophy points
1,298
Activity points
2,514
Please tell me how to interface AT89S52 MC with a network card.
I only need to send one or packet (wake on lan) to network card from MC.
This is the only MC i have with me so using any other MC is out of question.
 

better is you get one serial to ethernet convertor and send packets via it.. it will be lot easier.. than using network/LAN card directly
 

can we communicate using LAN Card of PC, but we control it using embeded system..
is there somebody that have the experience? how to handshake with a LAN Card?
 

NIC/LAN
intefacing (Sending message via ethernet)
There is one project please find in attachement
 

Attachments

  • dclausen_nikhilele.pdf
    214 KB · Views: 140
hi nikhilele

thank's for replying, the ethernet card is based on ISA slot,
do you have another that using PCI LAN ethernet..
ISA slot and PCI slot is the same?
 

ISA and PCI are different...

---------- Post added at 13:37 ---------- Previous post was at 13:36 ----------

you will get ISA solt and ISA LAN CARD in some old PC repair shop
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top