Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

drawing a 3D(mesh or surface) diagram in MATLAB

Status
Not open for further replies.
P

perado

Full Member level 2
Full Member level 2
Joined
May 28, 2010
Messages
127
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
2,134
hello, I have data like the photo that I attached and I want to draw a surface with this data in MATLAB , but I dont know how I should write the program in command window, please help me

 

A good start would be surf(my_matrix) command. Then you can go further by finding commands to modify axis labels, ticks and other properties.
 

Hi Perado

This is Simple you have an x axis and a y axis right
x = [val1 val2 etc..]
y = [val1 val2 etc..]

[X Y] = meshgrid(x,y)

Input_Matrix = [ row1 ; row2 ; etc..]

mesh(X,Y,Input_Matrix)

Thanks,
Omar
 
  • Like
Reactions: perado

    P

    perado

    Points: 2
    Helpful Answer Positive Rating
Hi Omar, thanks
your suggestion be very helpful but now I have a problem that is an error when I import the Input_Matrix from excel (beacuse I have data in excel format, a matrix with 36 column and 4000 row).
what I should do to troubleshoot??

 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top