Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to plot co- and cross polar radiation pattern at E and H planes in CST ?

Status
Not open for further replies.

Sarah.Mokbel

Newbie level 2
Newbie level 2
Joined
Dec 20, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
Dear All

i have a project on a IEEE article " Integrated bluetooth and UWB Antenna "

and i have several questions

1. I don't know how to plot the co and cross polar radiation pattern at E and H planes in CST at given frequencies (fig.4)

2. how to plot the gain & directivity vs frequency (fig. 5)

I appreciate your quick reply with detailed steps as I am not so familiar with CST
thanks in advance
 

You can make both plots with the template based postprocessing. First of all you have to set farfield monitors at the wanted frequencys. You find it unter "Solve" --> "Filed Monitors". Then Choose "Results" --> "template based postprocessing". There you have to choose Farfield results. In the upcoming window you can selevt whatever you need.
 
thanks for ur effort , could u also tell me how on HFSS
 

Hello in hfss(ver 10)
results create reports {█(far field@radiation pattern)┤
then click ok
you first chose soulution (create reports)---(far field-radiation patterns) then click ok, you first choose solution (sweep for all frequency) then
in sweeps tab chose a frequency (one frequency) chose phi=0 or 90 and your primary sweep must be theta
in mag tab choose rE (category tab) and in quantity select rEphi and rEtheta( dB)
if don’t solve your problem up your file
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top