Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need for the design of the Volt Meter (0:5)volt

Status
Not open for further replies.
L

lion2020

Newbie level 4
Newbie level 4
Joined
Dec 15, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,315
i need design for the Volt Meter and control the volt
Working voltage warning if more than 5volt
need (code file , Simulation file and layout file)
 

this circuit does not control the voltage
 

then this might help you
 

Attachments

  • 用89C51做稳压直流稳压电源.jpg
    用89C51做稳压直流稳压电源.jpg
    118.1 KB · Views: 127
do u need ac voltmeter or dc
tell me ,i will help you
 

Hi,

Here the datasheet for a ICL710X:

The Intersil ICL7106 and ICL7107 are high performance, low
power, 31/2 digit A/D converters. Included are seven
segment decoders, display drivers, a reference, and a clock.
The ICL7106 is designed to interface with a liquid crystal
display (LCD) and includes a multiplexed backplane drive;
the ICL7107 will directly drive an instrument size light
emitting diode (LED) display.
Click to expand...

Someone else was looking for a standalone voltmeter, so I dug up the datasheet.

All you need to supply is either a segmented 3 1/2 LCD or LED and viola! You have a complete voltmeter.

Hope this info helps!
 

Attachments

  • ICL710xDatasheet.pdf
    534.4 KB · Views: 135

i think lion2020 wants to build voltmeter using micro controller and 7seg so s/he can't control voltage from this chip this is just a voltmeter
 

Then he doesn't want a voltmeter, he wants a programmable DC supply with 7 segment display!

They are two different animals completely.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top