Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to design common-emitter amplifier

Status
Not open for further replies.
B

babi

Newbie level 3
Newbie level 3
Joined
Oct 20, 2010
Messages
4
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,304
How to design common-emitter amplifier with the general configuration
Give that the magnitude of the small-signal voltage gain should be Av=50 while driving a load RL=10K. Bias the circuit at +/-3.3 V.
Vceq=3.3 V
Icq=1/2 Icmax with Icmax=1.3 mA.
IMG00013-20101216-1503.jpg
 

**broken link removed**

**broken link removed**
 
babi said:
How to design common-emitter amplifier with the general configuration
Give that the magnitude of the small-signal voltage gain should be Av=50 while driving a load RL=10K. Bias the circuit at +/-3.3 V.
Vceq=3.3 V
Icq=1/2 Icmax with Icmax=1.3 mA.
View attachment 51717
Click to expand...

I think this may help u..
It's common emitter amp..
Ic=1.2mA
84_1292736582.jpg
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top