Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

24v dc to 19v dc power supply

Status
Not open for further replies.
S

snazzy c

Junior Member level 3
Junior Member level 3
Joined
Nov 26, 2010
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,502
i want a schematic for converting a 24v battery dc to 19v dc 3A supply. seems am going to use regulators and or adjustable IC! pls help.
 

The typical circuit for LM317 will not be enough because it can give 1.5A max.
There is a second schematic in the LM317 datasheet called high current adjustable regulator.
You can also use an LM350 which is rated for 3A.

Alex
 
you can use pwm regulator if you want to low the wastage (24-19)*3 =15W
 
Hi snazzy,

Go for any switching regulator, it gives a good efficiency, since you are operating with battery power efficiency comes the first priority,

LM317 are called as LDO regulators whose efficiency will be less.
and heat up with little more current also...

go ti.com or onsemi, you may find switching regulators forthis purpose....

you don't neeed to work anything other than just follow the reference design provided by IC datasheet it really works...


thanks
babesh...
 
pls can you explain more on the pwm regulator(s).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top