Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

transformer coupling co efficient in agilent ADS momentum

Status
Not open for further replies.
K

kjha

Junior Member level 1
Junior Member level 1
Joined
Oct 22, 2010
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,397
hi,

I am trying to make a transformer in ADS momentum..
i am using following equations to calculate L and Q of individual inductors
L = imag(1/y(1,1))/(2*pi*f)
Q = imag(y(1,1))/real(y(1,1))

replace y(1,1) by y(2,2) for second inductor

Qustion:(1) does this formula hold true when both inductors are modeled as differential inductors??

(2) how do i calculate coupling co-efficient k of the transformer??

thanks
 


@bigboss/Zander_ua: can any of you tell me how to assign a ground to a transformer in ADS momentum?? if i assign port 1 to one end of primary and ground the other end, ie not make a differential circuit, the analysis of equivalent circuit becomes very easy..i'll assign port 2 to one end of secondary and ground the other end of secondary too..thanks in advance..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top