Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

stages in a current straved VCO

Status
Not open for further replies.
vijay_nag

vijay_nag

Advanced Member level 4
Full Member level 1
Joined
Apr 26, 2005
Messages
107
Helped
8
Reputation
16
Reaction score
4
Trophy points
1,298
Location
india
Activity points
2,089
current starved vco

hi all!

can anybody tell me why should be the minimum number of stages in a current starved VCO be 5? please suggest me any documents regarding this.

regards,
vijay
 

Re: current starved vco

Current starved can be implement by odd number of stages and at least 3 stages. Because the output signal of final stages feed back to input of first stages must be 180 degree.
 

    V

    Points: 2
    Helpful Answer Positive Rating
More stages means more gain. A 3-stage oscillator can hang
up at midrail or fail to start. 5 is your next step up. More is
even better provided you can get to max frequency, you can
run sharper edges but more of them and end up with less
jitter. Use an odd, prime number to avoid multimode problems
(e.g. 9 could oscillate at 9X or 3X unit-delay period).
 
  • Like
Reactions: jonnoi2006

    J

    jonnoi2006

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top