Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How to reverse the bits in a byte?

Status
Not open for further replies.
A

agg_mayur

Member level 3
Member level 3
Joined
Feb 25, 2010
Messages
66
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Location
India
Activity points
1,715
How to reverse the bits in a byte, for e.g. i have
LSB----------MSB
0 1 1 0 0 1 1 1
should be convert to
MSB----------LSB
1 1 1 0 0 1 1 0
and vice versa?
 

Because no microcontroller has a built in hardware instruction for bit reversal, you usually do it in a loop, utilizing shift instructions. I guess, you can easily figure out the C code for the operation.

The fastest method is however a ROM table of 256 bytes, that holds the reversed code for each possible input byte.
 

hi,

try to test this code in C!

byte input
byte output
byte bit

output_byte=0

for(count=1;count<=8;count++)
{ bit= input & 0x01;
input=input>>1;
output=output<<1;
if(bit==1)
output=output+1;

}
 
@pmar_kpj
Thankyou for the solution it works!!

---------- Post added at 11:01 ---------- Previous post was at 11:00 ----------

One more solution i got from somewhere which i want to share:
for(count=1;count<=8;count++)
{
bit = num & 0x01;
num = num>>1;
output = output<<1;
if(bit==1)
output = output+1;
}
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top