liteon
Full Member level 2
Hello.
I need to program an AT89C51 for this programmer . i think it is not possible to program 89C51 with some simple programmer hardware.This is my first post so me not allowed to post direct links.
h**p://chaokhun.kmitl.ac.th/~kswichit/easy2puiu/easyp52.htm
But the 89S51/52 can be programed with simple parallel port programmer.
On this web the firmware is provided for 89C51 master chip. My question is that can i burn the same file into a 89S51 and use it as master chip to program 89C51 then put the programed 89C51 back as master chip.
The firmware provided for master chip is a binary file, it can be converted to hex file with binary to hex converter. Am i right?
Thanx to all.
I need to program an AT89C51 for this programmer . i think it is not possible to program 89C51 with some simple programmer hardware.This is my first post so me not allowed to post direct links.
h**p://chaokhun.kmitl.ac.th/~kswichit/easy2puiu/easyp52.htm
But the 89S51/52 can be programed with simple parallel port programmer.
On this web the firmware is provided for 89C51 master chip. My question is that can i burn the same file into a 89S51 and use it as master chip to program 89C51 then put the programed 89C51 back as master chip.
The firmware provided for master chip is a binary file, it can be converted to hex file with binary to hex converter. Am i right?
Thanx to all.