Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help the PowerPC440 and the FPGA application

Status
Not open for further replies.
L

lahrach

Full Member level 3
Full Member level 3
Joined
Feb 6, 2009
Messages
170
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,285
Hi friends;

I ask if it is possible can I use the embedded controller PowerPC440 to control an application on trhe FPGA.

example :

PPC440 to control an FFT implimented on the FPGA

if it is possible can you help me by sending to me your seggestions and tips

regards
 

Yes. You can place a design on the powerpc bus and from there control anything. There are many examples in the Xilinx EDK folder that show how to integrate a hardware design and the powerpc. Using bus reads/writes, you can control anything. You are limited of course to the bus speed.

Good luck
 
Hi Chops211

thank you for this answer

have you examples,

regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top