Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] PROGRAMMING ATmega32 MCU

Status
Not open for further replies.
A

anoop kr

Member level 4
Member level 4
Joined
Aug 6, 2010
Messages
69
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
kerala
Activity points
1,885
Hai... I dont know to how my ATmega32 can program through the JTAG interface.
If there any schematic of this.And please tell me what is mean by On-chip debugging of program.Please give me a solution.
 

Do You hawe a JTAG interface?First of all the JTAG fuse mast be programmed to use a JTAG .Connect the hardware to the target chip in the board edn then from AVR studio select connect and choice JTAG ... and go...
 
Last edited:
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top