srinivasa
Newbie level 6
Hi
I am facing a problem in my project. i attached circuit, and datasheets.
In my circuit when i apply a signal of 1 MHZ at J2 (BNC connector) and i can see the output signal is square wave (LVDS signal) at U23 pins 2 and 3 on oscilloscope e.When i apply a signal above the 10Mhz i am not able to see the square wave but a triangular wave and voltage levels are in millivolts.the output signal should be square wave (0 to 3v with respect to GND).Help me if any one knows the solution.
Thanks in advance
srinivasa
I am facing a problem in my project. i attached circuit, and datasheets.
In my circuit when i apply a signal of 1 MHZ at J2 (BNC connector) and i can see the output signal is square wave (LVDS signal) at U23 pins 2 and 3 on oscilloscope e.When i apply a signal above the 10Mhz i am not able to see the square wave but a triangular wave and voltage levels are in millivolts.the output signal should be square wave (0 to 3v with respect to GND).Help me if any one knows the solution.
Thanks in advance
srinivasa