Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hi v-Kumar,
wich release do you use of PADS ? If you use PADS 9.0 ol later, you have the translators (schematic and pcb) in your installation. In 2007 releases of PADS you need to download and install the translators, from Mentor site.
Do not use .rinf ! Is used by Cadstar only for NETLIST. The translator NOT recognize .rinf format.
Another, wich version of Cadstar schematic of cadstar you need to convert ? Please see the list of version in the PADS Translator.
Last argument, the schematic source are ok ? Otherwise the conversion are not good, off course !
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
