pareshmhetre
Junior Member level 1
- Joined
- Jul 10, 2010
- Messages
- 15
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Pune, India
- Activity points
- 1,382
I am working on creating a mount for CCTV cameras, that can rotate 360 degree along X-axis and 90 degree along Y-axis.
I want this mount to consist of two servo motors for each axis. These will be driven by a Microcontroller, through serial comm.
My application is very specific to the Angle of the movement, and needs high precision. I need help to drive the servo motors, accurately via the Microcontroller.
In short, I want to feed in an Angle from my computer to the device, which should in turn give the exact change in angle of the camera view.
Currently working with 8051, is there any other controller recommended to be used with a servo motor?
Or, if 8051 how would that be done?
I want this mount to consist of two servo motors for each axis. These will be driven by a Microcontroller, through serial comm.
My application is very specific to the Angle of the movement, and needs high precision. I need help to drive the servo motors, accurately via the Microcontroller.
In short, I want to feed in an Angle from my computer to the device, which should in turn give the exact change in angle of the camera view.
Currently working with 8051, is there any other controller recommended to be used with a servo motor?
Or, if 8051 how would that be done?