Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

mosfet and mosfet gate driver for bldc motor driver bridge

Status
Not open for further replies.
E

etiquoe

Member level 1
Member level 1
Joined
Feb 18, 2010
Messages
35
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Location
Indonesia
Activity points
1,525
i wanna build 3 phase bldc motor driver

this is the motor spec:
Voltage : 24 VDC
rated input current : 2.1 A
maximum input current : 3.5 A
Rated Speed : 2500 rpm

i'm going to use mosfet and mosfet gate driver ic (low side - high side driver) for the driver-bridge.

what parameters have to be considered to select appropriate power mosfet and mosfet gate driver ic for my driver-bridge?

anyone can help?

thanks
 

Re: mosfet and mosfet gate driver for bldc motor driver brid

refer microchip application note.
 
  • Like
Reactions: rychy

    E

    etiquoe

    Points: 2
    Helpful Answer Positive Rating
    R

    rychy

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top