Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Regulated Powe supply 0-15V 25A

Status
Not open for further replies.
pcb tca785

Dear Mr.Cube,
I'm still waiting for the schematic you offered, but because the day when i have to finish my work is closing i just want to remind you to send me the schematic.
sime_mileski@yahoo.com
Best regards,
Sime
 

voltage regulator 25a 15v

Sorry for waiting I finaly find time to post schematic.

Feed back for current.
 
power supply + tca785 + pulse transformer

3 pulse rectifier theory.
 

what do thiristors do

Schematic with 6 thyristors rectifier bridge.
 

power supply using ic tca 785 german

Scematic with 3 triacs. This is my first solution for galvanic mashine. It's not perfect but its still working after 8 years.
 

tca785 ile sinyal

Some schematics and pcb's in e@gle format.
 
0-15v

Hi mrcube
I am making a six-pulse rectifier with 6 thiristors. The rectifier supply 12VDC-1000A. I use TCA785 of siemens. But in the datasheet, i see GND pin is connect with -15VDC (power supply) and neutral? I think it is wrong. What do you think about that?

Added after 14 minutes:

I'm new user so I have not enough point to download your file. I think I will have it in recent day. Thanks
 

secundar

I have solved my proplems. But I have another proplem. The output DC voltage of my 3-phase rectifier is not stable. It fluctuate, I used ossiloscope to test the parts. I see interference from synchronous signal. I turn off the transformer, the noise disappear. I think the transformer cause the noise so I put a ferrit filter on the synchronous signal line. The needle of the voltmeter more stabler than before but it still unstable. I don't understand. Can anyone help me?
Thanks!
 

tca785 app notes

thanks but it's still not very clear
 

similar to tca785

i'm newbie, too
i have problem with syns signal fed to pin 5 when i design 3 phase rectifier using 3 TCA785
because if i use 3 phase A,B,C from sources to be syns signals, it will be wrong about time to define delay angle (regard voltages, i use transformer and filter already)
thanks for your supports, I can't download file needing point, so please give me a suitable way
 

charger battery 15v 2,5a schematic

if you need ac you can use SCR or TRIAC
if you need you have to use MOSFET
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top