Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Inductive Vs. Capacitive discharging

Status
Not open for further replies.
vinodquilon

vinodquilon

Full Member level 3
Full Member level 3
Joined
Oct 24, 2009
Messages
158
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
2,558
What is the difference between Inductive & Capacitive discharging ?

I think Capacitor discharges in the opposite direction of its charging. Does it change its polarity ?

And Inductor discharges in the same direction of its charging. Does it change its polarity ?
 

Assuming charging and discharging paths are different. For capacitor a parallel discharge resistor is there and for Inductor a series discharging resistor is there

A capacitor opposes change in voltage and hence when the supply path is removed it tries to maintain the same voltage and thus current direction is reversed if it starts to discharge. The capacitor does not change its polarity. It just discharges from the initial value of potential towards zero.

An inductor opposes any change in current and hence to maintain this it changes polarity...
 
Capacitor => Voltage polarity same,
....................Current Polarity Reversed.
Inductor ==> Voltage polarity reverses,
.....................Current Polarity remain same.

Thanks
 

A capacitor obviously stores electrical charges. An inductor doesn't. I can't see a reasonable meaning of the term discharging related to inductors.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top