Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

hi pls where is the error in that design

Status
Not open for further replies.
abdoeng

abdoeng

Advanced Member level 2
Advanced Member level 2
Joined
Feb 22, 2004
Messages
647
Helped
76
Reputation
152
Reaction score
63
Trophy points
1,308
Activity points
3,812
i make atf36077 q point ,there is error in that file pls help
 

I think The usual polarity of the gate source must be with the - connectet to the gate and + to the groung.
 
  • Like
Reactions: ignosi

    I

    ignosi

    Points: 2
    Helpful Answer Positive Rating
I've checked your design and it works! (for example with vgs=-0.2V and vds=1.5V, Idrain=10.3mA).
Mazz
 
  • Like
Reactions: ignosi

    I

    ignosi

    Points: 2
    Helpful Answer Positive Rating
hi,for rope,i use negative gate source, for mazz,i simulate but when i drain any chart there is no items to chiose what i do!!!!!!!!!!
 
  • Like
Reactions: ignosi

    I

    ignosi

    Points: 2
    Helpful Answer Positive Rating
Look at the zapped project made in ads2003A.
Mazz

ps.: if you're using a previous version, simply edit the sch.dsn and correct the "1 7.600" with "1 x.x00".
 
  • Like
Reactions: ignosi

    I

    ignosi

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top