Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me with constellation diagram plotting of received signal

Status
Not open for further replies.
H

Haftom

Newbie level 4
Newbie level 4
Joined
Mar 29, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Ethiopia
Activity points
1,317
i am working on constellation diagram plotting of received signal, but i have got rotated constellation due to frequency offset. Is there any one who can help me to correct this offset please?
 

Re: constellation plot

what is the your modulation type? more info plz
it may be because of many reasons for example freq offset or sampling in middle of symbols
put your plot here
 

    H

    Haftom

    Points: 2
    Helpful Answer Positive Rating
Re: constellation plot

i am testing it using 4QAM signal. to get the center frequency FFT is used but the result is shifted frequency (the signal has 100Hz center frequency but the result is 120Hz).This offset in frequency rotates the constellation plot .how can i get accurate center frequency extraction from the signal? or how can i correct the offset frequency?.(i have tested the plot by giving 100Hz center frequency it plots perfect but i need to get the frequency for unknown signals, if the frequency calculated is not exact it rotates).Thank you for your help
 

Re: constellation plot

Send known data, find the amount of rotation, from this find the frequency offset. Then, for subsequent unknown data, multiply this frequency with the with incoming carrier and filter our unwanted frequency. Thus you rotate is back to correct value
- b
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top