Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulation of Cylindrical microstrip antenna using HFSS

Status
Not open for further replies.
A

amitsinghjiit

Member level 1
Member level 1
Joined
Sep 15, 2009
Messages
33
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Location
delhi
Activity points
1,465
I want to simulate Cylindrical microstrip antenna using HFSS i dont know how to curve a patch on cylindrical base can any one help me is the design i am working on plzz give me help file of anisoft to design 3 d design of conformal microstrip antenna like cone also.[/img]
 

i want to simulate a 3 D figure with a cavity in HFSS can any body help me
 

You need to use something like 'Projection' feature. I am not sure where it is in HFSS, but I can create for you such a file in EMCoS Virtual AntennaLab. Attached is similar SAT file (you can load it in HFSS) - specify your dimensions, I'll generate what you need.

We can also compare simulation results, if I'll have some time to simulate it as well. What is frequency range? What you are looking for - S11, patterns? Or what publication you are referencing by this model?
 
thanxxxxxxxxxxxxxxx

Added after 21 minutes:

I need to use HFFS. I am not sure where it is in HFSS, but I can't draw the microstrip antenna with geometrie Rectangular,please HELP ME. THANXXXXX
 

hi.
You can follow the procedure:
step1- both models in the same design
step2- select target object(2D or 3D) and objects to imprint(2D)
step3- select the menu item Modeler>Boolean>Imprint Projection>Along Direction.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top