Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

capture module resolution pic16f877a

Status
Not open for further replies.
A

Anuradha1

Member level 2
Member level 2
Joined
Nov 11, 2009
Messages
49
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
India
Activity points
1,570
Hello,


According to the data sheet pic16f877 has two capture modules. It is mentioned (page 1 of the data sheet) that the maximum resolution of the capture module is 12.5ns.


Can some 1 explain what is meant by this?


Thank you.
 

It means the minimal time difference between two captures hast o be 12.5 nano seconds :)


The CCP module (in capture mode) records the current value of a 16 bit timer the moment you put it's respective CCP pin to high (or low if set up by software).
 

    A

    Anuradha1

    Points: 2
    Helpful Answer Positive Rating
jumper2high said:
It means the minimal time difference between two captures hast o be 12.5 nano seconds :)


The CCP module (in capture mode) records the current value of a 16 bit timer the moment you put it's respective CCP pin to high (or low if set up by software).
Click to expand...

Thanks.

It sounds that I can capture a signal which changes within 100ns. Isn't it?

Is there a way to know how many times it counts within 100ns. Is it 100/12.5?

or do i have to think of my oscillator frequency which is 4MHz?

Hoping a soon reply.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top