Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Fault simulation using Tetramax..External patterns help! Plz

Status
Not open for further replies.
R

rohitwins

Newbie level 3
Newbie level 3
Joined
Mar 21, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
Hello. Iam working on my project with tetramax. I have generated internal patterns using tetramax. Can you please teach me how to generate testpatterns using external patterns mode? Like how do we usually apply the patterns. is there any format? Please teach me the important aspects of tetramax.... i would be very very very very glad for your help!!

Godbless you!! Thank you very much!

Rohit.
 

Hi Rohit,

What u have to do is;
1) first you save the internal patterns in .wgl format (I think u r looking for this format). This you
have to do during the pattern generation time.
Command: cmd1) set patterns internal
cmd2) run atpg
cmd3) write patterns pattern_file.pat -internal -format wgl
2) Then modify the existing patterns with the external pattern
of your interest and then simulate.

Few Definition: External patterns are those patterns which are generated by user. They can be applied to Tmax latter for simulation purpose. Internal patterns are those which Tmax can genrate for user.
 

    R

    rohitwins

    Points: 2
    Helpful Answer Positive Rating
Thank you ! The information really helps me ！
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top