Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

IO "Placement"

Status
Not open for further replies.
C

crigri

Junior Member level 3
Junior Member level 3
Joined
Dec 14, 2009
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,466
Hi!

I have a question regarding the IO placement.

I have to design a digital circuit with soc encounter. Now I'm wondering how i can define where the IO will be placed. I have to mention that the pad structures will be placed in the top level when puting together all of my "blocks". For the moment I just want to define the postition of the pins in the digital design. E.g. i want the SDA pin to be placed on the left side of the boundary. How can I define this?

Hope u understood what I was talking about :)

Best regards
 

hi .
the easiest way is let the tool do placement automatically, and then write out a .io file. you can play with this .io file to place the pins where ever u want it .

BR

SING
 

    V

    Points: 2
    Helpful Answer Positive Rating
HI!

You mean to:
*) do the whole desing
*) write out the IO file
*) change the IO file
*) do the design again with the changed IO file

??????? Did i get u right?
How can the IO file be created?

kind regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top