Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

can anyboby help me to draw a "seal ring" for my i

Status
Not open for further replies.
alizadeharand

alizadeharand

Member level 3
Member level 3
Joined
Feb 22, 2009
Messages
58
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,629
seal ring

can anyboby help me to draw a "seal ring" for my ic?
 

seal ring

You gave no information that is useful.

What tool are you using?
What PDK are you using?

Your foundry will be able to help you better, refer to the design documents from the PDK.
 

Re: seal ring

I'm using Cadence IC5033, and my process is TSNC 0.18u.
is it enough?

Added after 4 minutes:

i mean TSMC
 

seal ring

You can get the information in DRD of TSMC180nm
 

seal ring

design rule documentation.
 

Re: seal ring

so can you send me that DRD?
 

seal ring

if you have obtained the kit legally you should have access to them.
 
Re: seal ring

can you send me the seal ring section of the doc?
 

Re: seal ring

I can give you this much from the TSMC CL018 documentation:

"The information contained herein is the exclusive property of TSMC and shall not be distributed, copied, reproduced, or disclosed in whole or in part without prior written permission of TSMC."
 
pg no 58 of your DRD... for TSMC 180nm..... specifies Seal ring rules..:)
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top