Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Miller Effect to good use?

Status
Not open for further replies.

patricky

Junior Member level 1
Junior Member level 1
Joined
Jan 26, 2010
Messages
17
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Location
USA
Activity points
1,421
Hi,
Can someone actually use the miller effect to help them?
Thanks.
 

The miller effect is used to create a dominant pole in frequency compensated op-amps. Without it, integrated capacitances would be too small to be useful in this manner.
 

    patricky

    Points: 2
    Helpful Answer Positive Rating
Miller effect can (like it or not) produce a slew-rate-limited
output transition. You can see this in slew-controlled CMOS
logic buffers and in power MOSFET applications - gate
resistor vs Cdg*dV/dt(out) enforce a maximum drain
slew rate.
 

    patricky

    Points: 2
    Helpful Answer Positive Rating
In simple terms, the Miller effect allows a small capacitance to be "amplified", which is useful for compensation. Using a non-Miller capacitance for compensation means it will have a larger value, hence larger area.
 

    patricky

    Points: 2
    Helpful Answer Positive Rating
The well known inverting MILLER integrator circuit exploits the MILLER effect (that´s the reason for its name).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top