Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HSPICE .tr file size...

Status
Not open for further replies.
B

bharatsmile2007

Full Member level 3
Full Member level 3
Joined
Sep 19, 2007
Messages
179
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
2,306
Hi,

i have done a transmission line simulation.The .tr file generated was 6GB,so iam not able to open in CSCOPE.

Can any one suggest how to view the .tr file with large size?

Thanks
 

You will not be able to open the .tr file using cscope if it is more > 2Gb size. Try to avoid using wild card (.print v(*)) in your control file. This will create bigger output file. Instead try node/hierachy printing. If you are running transient analysis, try not to make time steps too small.
 
custom waveview ( synopsys) is a waveform viewer that don't have any limitation in sizes of waveform..
you can even open 50GB files without any issue...
supports more than 50 different formats...

Added after 2 minutes:

sjamil02 said:
If you are running transient analysis, try not to make time steps too small.
Click to expand...

by default user don't control time steps size in hspice. its all automated in hspice.
you can use wdf format instead of tr0 , that will save disk space
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top