Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Transmit SNR and Receive SNR

Status
Not open for further replies.
C

channel_coding84

Junior Member level 3
Junior Member level 3
Joined
Nov 13, 2009
Messages
26
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,283
Activity points
1,414
What is the difference between Transmit SNR and Receive SNR.
some help please!!!!!!!!!!!!!!
 

I guess:
Transmit SNR= transmitted power without any attenuation/thermal noise power in the transmitter electronic circuit.
Receive SNR= received power/end-to-end total noise
 
This is the point of confusion.

If the transmit power is the power with any thermal noise or attenuation then why do we say "Transmit SNR", because SNR means "Signal-to-Noise ration, if the transmit side does't have any noise then why to use this term.

by the way thanks for your reply.[/quote]
 

Typically SNR is not measured at the transmit mode, instead we do measure TX EVM. In the receive mode we do measure SNR and it is combined effect of channel attenuation and all kind of noise including fixed point error.
 
But, the term Transmit SNR is used quite often. Any idea why is it so ??
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top