Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What harm does it do if psub is floating?

Status
Not open for further replies.
C

cnc7

Newbie level 1
Newbie level 1
Joined
Nov 28, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
California
Activity points
1,285
Hi
If Ptap is not connected to psub(ground)? What harm does it
do if psub is floating?

thx
 

Floating psub

Your substrate is always prone to noise. Its also necessary to bias the substrate to avoid latchup problems...
So it is essential to connect the substrate to the lowest potential...
Plus the threshold voltages of MOS depends on the biassing of the substrate... So if you dont connect the Psub to a commonn potential then all the NMOS, which are built on the P substrate, will have differenent and unpredictable threshold voltages..
So its essential that you bias the substrate..
 

    C

    cnc7

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top