Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

most cheap way of communicating the s7-200 with the pc

Status
Not open for further replies.
how built cable s7-200

hii Molehiya

I think you must change your connecting point setting

if you can t change this I will send email "how to change "
 

s7 200 cable

hii

I can help if you mail to me

I sent circuit a lot of friends

many friends it worked

best regards
 

pc/ppi cable 11bit setting

I improved this cable
I can help if you mail to me
I can send circuit shematic and PCB
best regards
 

s7 200 port 0 pins diagram

Hello!

For S7-300,S7-400 you need an PC USB adapter or a CP5511/CP5512 adapter.Until now there is no schematics.

For S7-200,S5 try this link:

**broken link removed**

Best regards!
Venix
 
  • Like
Reactions: macir

    M

    macir

    Points: 2
    Helpful Answer Positive Rating
diagram for s7-200 pc ppi cable

Thanks
A good link

Best regards!
 

problems communicating with s7 222 cpu

@macir:
I received your file but I do not know the software to open file with extention LYT.
PLS show me the name of software to open file

Thanks so much!
 

pc/ppi cable trouble

You must use " proteus (ARES)" program for this circuit

Best regards!
 

s7-200 to pc

macir said:
You must use " proteus (ARES)" program for this circuit

Best regards!
Click to expand...

Thanks so much :idea:

I have drawn a new pcb in Eagle and used 2 port 9 pins :D
 
Dear jackrs

Please advice me how to test your cable with s7-200 and pc ,give an example with pc software and s7-200 program

Best Regards

MedTronic
 
  • Like
Reactions: macir

    M

    macir

    Points: 2
    Helpful Answer Positive Rating
Schematic of USB to Logo PLC cable
Tested with Siemens s7-224. Works fine
Download and install drivers from FTDI for FT232B for create virtual serial port
 
Sorry, the cable usb2logo is not for s7-200
IS FOR SIEMENS LOGO
TESTED WITH LOGO, IT WORKS FINE
 
  • Like
Reactions: macir

    M

    macir

    Points: 2
    Helpful Answer Positive Rating
thanks for the logo cable. i made it and works fine.

Added after 1 minutes:

hi, again but i need mpi s7-300 cable schematics do you have that?
 
  • Like
Reactions: macir

    M

    macir

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top