Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

fpga emulation - problem with cable connection

Status
Not open for further replies.
M

menagarani

Newbie level 4
Newbie level 4
Joined
Feb 23, 2007
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,326
fpga emulation

im havin XC 3S400 fpga kit with me. while im downloading the program to the kit , im getting a message like this. 'check the cable connection'.
plzz help me with needful
 

Re: fpga emulation

Can you tell me the cable that you are using to download your bit file.Usually it should be a Xilinx platform cable.
 

Re: fpga emulation

it is the cable provided by the kit vendor itself. i dont remember its specification
 

Re: fpga emulation

OK then do you get an error window in imapct asking you to check cable connection and the voltages ???? If the error message tells you to check for voltages then it could be problem with the JTAG chain.... And by the way have you installed the cable drivers in your computer????Does the LED in your programming cable glow and changes color when you connect it to your board?If either of the things does not happen then it is a driver issue..It will be better if you can paste the messages that you get in the console when you initialize the scan chain:D
 

    M

    menagarani

    Points: 2
    Helpful Answer Positive Rating
i got cleared by myself. actually the problem is due to improper cable fixture between my PC and the FPGA board.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top