Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Universal JTAG Adapter

Status
Not open for further replies.
M

mosi

Newbie level 4
Newbie level 4
Joined
Aug 30, 2009
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
jtag adapter

Hi my friends ....

What is Universal JTAG Adapter ?
And what is Universal JTAG Interface ?
(both of them are from Altium)
Please explain ....
Which of this two board is FREE ?
And I need to Schematic and PCB of them.
 

altium jtag adapter

These are JTAG cables that connect to a parallel port. They are similar to the parallel port adaptors available from Altera, Lattice or Xilinx, except they have a soft JTAG as well as a hard JTAG. That means they use 4 pins for normal hardware JTAG programming, but the other 4 pins are used for "in-circuit debugging" of embedded processors, or firmware based instruments.

The circuit is included as the refeence designs installled with Altium.
 

    M

    mosi

    Points: 2
    Helpful Answer Positive Rating
jtag adapter cable

Hi konradb
Thanks
I have more question ......
I was found Universal JTAG Interface Project (Schematic and PCB) in Reference Designs installled with Altium.
there isnt Universal JTAG Adapter. where is it ?

importatnt question :
can we use "Universal JTAG Interface" with Xilinx ISE Foundation and Altera Quartus to program Xilinx and Altera Devices whitout using Altium Designer ?
Indeed does "Universal JTAG Interface" support ISE and Quartus ?
 

jtag mosi

There is a switch on the JTAG Adaptor supplied by Altium that switches compatibility between Xilinx and Altera. The adaptor can be used with Altium with full debug capabilities or with the Xilinx or Altera programmers.
The circuit diagrams & functionality of all these parallel port programers are similar.

The Adaptor and Interface references both mean this cable.

If you search the web, Altera circuits for their cable are also available.

The main differences are 1) the cables use different data pins for the JTAG signals and 2) the 10-way (2x5 2.5mm pitch) headers have different pinouts.

Note that Altera configuration devices are not JTAG compatible and you need an Altera cable to program these devices.
 

    M

    mosi

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top