Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

sim 300 gsm modem power supply

Status
Not open for further replies.
R

raja_merit

Newbie level 5
Newbie level 5
Joined
Jun 27, 2009
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,339
sim300 gsm modem

hi,
i am designing a sim 300 modem. I want to know how to design the power supply,what are the components to be used,their values , what about the specifications and the logic diagram. where can i get the required details?
 

power supply for gsm modem

It's best if your power supply provides about 4.2V to the SIM300 – at lower voltages the module is more susceptible to noise. The module can draw as much as 2A when transmitting, so your power supply must have good load regulation and it must be well filtered to prevent ripple and noise. I use an LM317T regulator with a 4700uF cap on the input and a 2700uF cap on the output. Also, make sure you have filter caps right at the power pins.
 
  • Like
Reactions: suguna

    S

    suguna

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top