Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

OMRON PLC Support need plz

Status
Not open for further replies.
P

pakiboy

Newbie level 6
Newbie level 6
Joined
Apr 15, 2007
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,361
omron cx-one rapidshare

I have OMRON PLC--> SYSMAC C2000H- Redundant CPU this is installed for some Process Contolling.
Currently, ladder logic program is running on it but Unfortunately i dont have any source to retrive that program from its CPU that is currently running on it.

I have only its hand held programmer & I dont have its software available on CD/system as backup.

Could any of you tell me please how can i retrive its ladder logic program from CPU ?

Although there is an option available to view its ladder logic through Hand Held programmer but it would be q quite tough job in this case as there are thousands of points in this program!!

I would appreciate if any of you enable to provide me an effective solution?

Regards

eVil geNius
 

omron cx programmer rapidshare.com

hiii
i ask why you do not cx programmer software
if you have not soft ware i give you the link
 
rapidshare cx programmer

Plz give me the link....i dont have
 

cx-one_v.3.0.009

hi!

you have said that the controller has some ladderlogic in it.well is it functioning well...? is there any errors with PLC...?

you said you have the hand held programmer with you.Did you try to interface it with the plc....?
were you able to go online after interfacing it...?
 

cx-one_v.3.0.001

Yes ladder logic is working perfectly well. No errors.
I hav successfully interfaced it with PLC & were able to go online as well.
 

backup plc with cx programmer

this is the link of cxone 3

**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**

Licence type "Site" S/N: 1644-4484-4442-3244
Licence type "1 user" S/N: 2200-0393-2209-1600

regards ahmed
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top