Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Formality failed to read .svf file with syntax error report.

Status
Not open for further replies.
B

bigdog

Junior Member level 2
Junior Member level 2
Joined
Jul 18, 2005
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,452
svf read

Hi Guys,

I meet an issue when I read .svf file with "set_svf ./svf_name.svf", that generated an error report:
##################################
line 1: syntax error at 'c'
Error: Invalid SVF, contents ignored (FM-339)
0
##################################

I generated my svf file with Synopsys DC:
##################################
set_svf ./svf_name.svf
##################################

Does anybody know the reason of the failure?

Thanks.

Note:
The version of my sofeware:
DC: Version A-2007.12-SP3 for linux;
Formality: Version X-2005.12
 

error: invalid svf, contents ignored (fm-339)

maybe the version of fm is older than the dc version
try dc2005.09
 

formality svf invalid

Hi,

As the Error is in Line 1, I could be either of below:

1) Use a newer version of FM, ahead of A-2007.12-SP3 version of DC.
2) SVF file was not clsoed properly in DC. Exit the DC session before reading SVF into formality. Also use "set_svf -off" command before "exit" command in dc_shell to close the svf file.

Hope this helps!

Thanks,
Daman
 
.svf file

Hi,

The issue has been solved, the reason is the old version number of Formality indeed,
I updata Formality to the latest version and the .svf file works.
Thank all of you!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top