Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help in CST simulation!

Status
Not open for further replies.
S

Spd

Newbie level 4
Newbie level 4
Joined
Jun 6, 2009
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
During the transient solver

The error show this "Some higher propagating modes at port 1 are not considered time domain calculation. This possibly leads to an inaccurate energy balance. Consider to reduce the port size or decrease upper frequency limit."

Any guide to solve this problem?
 

for removing this error first increase the port size i.e. increase the thickness of ground plane in which u assign port.

or u can also increase the mesh cell and then this problem also removed.
 
  • Like
Reactions: Frappa

    Frappa

    Frappa

    Points: 2
    Helpful Answer Positive Rating
sure. thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top