Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Proteus ISIS error: Pin ON1 is not modelled

Status
Not open for further replies.
W

WishWidLife

Newbie level 2
Newbie level 2
Joined
Jun 2, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
sir

i have encountered a problem with simulation in proteus ISIS,
i m using the component TL081 for power supply but it is giving the error,

and i want to use the 100K trimmer, but i m unanle to understand the error

the error is , Pin ON1 is not modelled.
and same for all the 3 TL081's
 

isspice,proteus

Make sure you are using a simulation model. Some parts don't have a simulation model and is for schematic only. In the lib it must say SPICE model
 

    E

    elbtl

    Points: 2
    Helpful Answer Positive Rating
tl081 simulation

yes there are two types of components, one is schematica and other is spice,
which one should i use for simulation?
 

proteus isis forum arab

SPICE
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top