Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to make width of pcb track wide and small in Eagle?

Status
Not open for further replies.

ehico16

Member level 4
Member level 4
Joined
Jun 15, 2006
Messages
79
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Activity points
1,763
please can some body help me with how to make width of pcb track wide and small e.g power and ground wide and signal small
 

eagle width

When routing a trace you can specify the width in the "Width" field. You can choose predefined values or enter a value manually.
A trace width can also be changed afterwards by entering or clicking: change --> width --> value --> click on the trace which should be changed
 
eagle set trace width in schematic

When routing a trace you can specify the width in the "Width" field. You can choose predefined values or enter a value manually.
A trace width can also be changed afterwards by entering or clicking: change --> width --> value --> click on the trace which should be changed




PLEASE BE MORE SPECIFIC WHAT AND WHAT TO BE DONE;WHAT IS WIDTH FIELD
,SCHEMATICS OR THE PCB SECTION. CAN YOU PLEASE SHOW IT WITH DIAGRAM
THANK YOU[/b]
 

eagle spesific track width

Here is the attached image on how to change the Track Width using the Change Option.


Hope it helps.:D
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top