Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to model SMA connector in Momentum?

Status
Not open for further replies.
A

ameziane

Newbie level 4
Newbie level 4
Joined
Nov 11, 2007
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,321
hello
iwant to realize a patch antenna with an coax fed .
i find an article with an sma connector i dont understand this sma .
how to introduce this sma a momentum.
 

Re: momentum

SMA connectors cannot be modeled in momentum, this is a PLANAR solver, and only PLANAR structures can be simulated. You need a 3D simulator like HFSS, CST, EMDS, ...
 

Re: momentum

You can model SMA in Momentum using Via

See the attached project
 

Re: momentum

i recommend u that u substitute the software u are doing ur analyzation.like hfss
 

Re: momentum

Do you have an explanation or article on how your design works?
It will be very helpful.

Thanks,
 
  • Like
Reactions: svia

    S

    svia

    Points: 2
    Helpful Answer Positive Rating
Re: momentum

You can model SMA connector with HFSS.

With momentum you can simple put the port in the desired place where your SMA will be. Even if it's not very accurate, you will get quite similar results
 

Re: momentum

anil_21p said:
You can model SMA in Momentum using Via

See the attached project[/QUOTEam new to cst and i want to know how to model microstrip with sma connector in cst
thnx in advance
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top