Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Very very urgent in HFSS - how to mesh correctly the via ?

Status
Not open for further replies.
MrElec

MrElec

Advanced Member level 4
Full Member level 1
Joined
Oct 10, 2005
Messages
111
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,298
Location
Tunisia
Activity points
2,074
Very very urgent

Hi,
I'm simulating a mushroom structure in order to extract circuit equivalent parameters at 11 GHz.

lambda refinement set to 0.05
ΔS=0.05

The problem is how to mesh correctly the via ?because the meshing subject is not clear at all in HFSS help.

Thanks
 

Re: Very very urgent

lambda refinement is basically done by lambda/3 value i.e.0.33333 and this is also default value and if u change this value ur result affected.........baause it changes the mesh...........
 

    MrElec

    MrElec

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top