Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
saumya_85 said:Suppose i am using transformer. ok
I have planned for like below:
Direct supply to transformer Which will convert 230 V Ac to 24 v Then use of Bridge rectifier circuit then regulator supply circuit.
But When i am going different searches:
I found that they are using One Varistor & a Capacitor Across the AC Supply before the transformer.
Could anybody explain me What is the need/role of Varistor & capacitor before the transformer?
Why we need a varistor?
You may consider making a switch Mode power supply. Link for datasheet of such design is attached. as collected from Power integration incsaumya_85 said:I require 5Volt DC with2A>I <3 Amp Current rating.
Current should be between than 2A to 3A.
But preferable 3A.
Hai Saumya_85, In case you need 5 volts at more ampheres, use 0-9 transformor 3A, rectify and filter the output and feed it to the High current voltage regulator which will supply 5 volts at 3amps..Do not forget the 'Helped me"button if you find this post has helped you. Good lucksaumya_85 said:I require 5Volt DC with2A>I <3 Amp Current rating.
Current should be between than 2A to 3A.
But preferable 3A.
Thanks pranam for your support.pranam77 said:Hai Saumya_85, In case you need 5 volts at more ampheres, use 0-9 transformor 3A, rectify and filter the output and feed it to the High current voltage regulator which will supply 5 volts at 3amps..Do not forget the 'Helped me"button if you find this post has helped you. Good lucksaumya_85 said:I require 5Volt DC with2A>I <3 Amp Current rating.
Current should be between than 2A to 3A.
But preferable 3A.
pranam77 said:It is used too provide the 3 amps current, with the volatge at the regulated level. 5volts in this case. Do not forget to press the 'Helped me"button if you find this post has helped you. Good luck
smxx said:hi
It is may be danger to use 230-5v