Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to create a Ground plane in HFSS

Status
Not open for further replies.
N

nirmansh

Newbie level 2
Newbie level 2
Joined
Apr 3, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
I am trying to assign the ground plane to the CPW gnd planes, but i am not sure how to do it. Anybody has any idea???
 

hi:

You can use "Perfect E" boundary or define a "copper" material.

I attached a CPW project in HFSS.
 

    N

    nirmansh

    Points: 2
    Helpful Answer Positive Rating
Hi Masud,

Please, can you have a look on this HFSS file.

how to define the port for this not grounded CPW antenna.


Thanks in 10000000000000000000


Mustafa
 

Hi Mustafa:

Unfortunately I have some problems with my HFSS. I will check it out ASAP. In the meanwhile, others could help you.

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top