Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

IBM 9SF / 9LP / 9RF design kits

Status
Not open for further replies.

pokemonstation

Junior Member level 1
Junior Member level 1
Joined
Mar 4, 2009
Messages
19
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,475
ibm 9lp/9rf cmos process

Hello, I am trying to do a layout in Cadence and I would appreciate any information on these IBM design kits (9SF / 9LP / 9RF). Has anyone used any of them before? Is it easy to install? Is it compatible with MOSIS? Thanks!

Michael
 

ibm 9lp cmos process

i use cmrf8sf 130nm, it is a very good kit. the structure gets tricky once updates are installed and you should be careful about the paths defined in .cdsinit, .cdsenv and cds.lib to ensure you are using the latest version of the kit.

http://www.mosis.com/ibm/ibm-cmos-kits.html
**broken link removed**
 
res cmrf8sf

If you get your design kit from MOSIS, then there will be no problem. Just remember not all transistors, res and caps are supported.
 
design kit ibm

Thank you both for your responses.

oermens: Is the library structured like GPDK or NCSU, in which all cells are organized in hierarchy (each cell has its own folder, and each view of each cell has its own folder) The reason why I ask this is because I had another library, in which the layout are stored in .gsd2 file and I don't know how to deal with that :(

psmon: all I really need are nmos, pmos, poly, metal1-3, n-well, p-sub, and vias/contacts that connect these layers. Do you know if those IBM libraries from MOSIS will be enough?

Thanks for all your help again!
 

ibm 9sf

i've never used gpdk or ncsu, only tsmc and ibm, but the description you gave is that of the kits i've used (cell->cellview). ibm has layout pcells so you can go directly from schematic to layout using virtuoso-xl, and if you want, ic craftsman.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top